
How much should I add to my pool?
Type in your test results. Otterly gives the exact amount of each chemical for your gallons, in cups, quarts and pounds, and the order to add them. Free, no sign-up.
Free pool chemical calculator
Free, no sign-up. Enter your gallons and test results; the calculator gives amounts in cups, quarts and pounds, in the order to add them.
Fix a problem
- How to clear a green poolRaise chlorine to the shock level for your stabilizer (16 ppm at CYA 40) and hold it there until the water clears.
- Why is my pool cloudy, and how do I clear it?Cloudy pool water usually means chlorine ran low, the filter is struggling, or pH and calcium are high.
- How to lower pH in a poolAdd muriatic acid or dry acid.
- How to raise pH in a poolAdd soda ash (pH up) to raise pH.
- How to raise alkalinity in a poolAdd baking soda.
- How to lower CYA (stabilizer) in a poolThe only reliable way is to replace water.
- Why does my pool smell like chlorine?The sharp pool smell comes from combined chlorine (chloramines), which builds up when free chlorine is too low.
- Pool cloudy after shockCloudy water after shocking is usually dead algae or calcium from cal-hypo.
How much to add
- Liquid chlorineTo raise free chlorine 1 ppm in 10,000 gallons, add 1½ cups of 12.5% liquid chlorine.
- Pool shock (cal-hypo and dichlor)One ppm of chlorine in 10,000 gallons takes 1.8 oz of 73% cal-hypo shock.
- Baking sodaTo raise alkalinity 10 ppm in 10,000 gallons, add 1 lb 6 oz of baking soda.
- Muriatic acidWith alkalinity near 100, lowering pH from 8.0 to 7.5 in 10,000 gallons takes 3 cups of 31.45% muriatic acid.
- Dry acid (sodium bisulfate)With alkalinity near 100, lowering pH from 8.0 to 7.5 in 10,000 gallons takes 2 lb of dry acid (pH Down).
- Soda ash (pH up)With alkalinity near 100, raising pH from 7.2 to 7.5 in 10,000 gallons takes 6 oz of soda ash.
All chemicals · Amounts by pool size
Guides
- Ideal pool chemical levels
- Chlorine and stabilizer (CYA) chart
- How to shock a pool
- What order to add pool chemicals
- Pool test strip meanings: how to read your results
- Test strips or a drop test kit?
- Pool chemistry basics
- Pool water balance (LSI) explained
- Saltwater pool chemistry
- Pool chemical safety
- Liquid chlorine, tablets or shock?
- Above-ground pool chemicals for beginners
- How long after shocking a pool can you swim?
- How to raise pH without raising alkalinity
- How to raise alkalinity without raising pH
- What should calcium hardness be in a pool?
- What is combined chlorine, and is it bad?
Common questions
How much chlorine should I add to my pool?
Enough to reach the target for your stabilizer level. At CYA 40, keep free chlorine between 3 and 7 ppm. Each 1 ppm in 10,000 gallons takes about 1½ cups of 12.5% liquid chlorine.
Do I need an account?
No. The web calculator works without sign-up. The Android app is free too.